Fujitsu IRMC S2/S3 Purpose and target groups of the manual, Service, Other information

Purpose and target groups of the manual

As an autonomous system on the system board of a modern PRIMERGY server, the iRMC S2/S3 has its own operating system, its own web server, separate user management and independent alert management. The iRMC S2/S3 remains powered up even when the server is in stand-by mode.

This manual describes how to configure the iRMC S2/S3 and the various user interfaces available.

1.1Purpose and target groups of the manual

This manual is aimed at system administrators, network administrators, and service staff who have a sound knowledge of hardware and software. It provides basic information on the technology behind IPMI and deals with the following aspects in detail:

–Logging on to the iRMC S2/S3

–Configuring the iRMC S2/S3

–User management on the iRMC S2/S3

–Advanced Video Redirection via iRMC S2/S3

–Remote Storage via iRMC S2/S3

–iRMC S2/S3 web interface

–Telnet/SSH-based interface (Remote Manager) of the iRMC S2/S3

–Configuring the iRMC S2/S3 with the Server Configuration Manager

–Updating the firmware

–Remote installation of the operating system via iRMC S2/S3

–IPMI OEM Commands

Service

If you have any further questions on remote management for PRIMERGY servers, contact the service and support partners responsible for you.

Other information

http://www.ts.fujitsu.com

12 iRMC S2/S3