Fujitsu IRMC S2/S3 manual Sensors Check status of the sensors

Sensors - Check status of the sensors

ÊDefine the behavior in the event of a fault using the list at the bottom of the work area:

–Choose continue if the server is not to be shut down if the selected fans fail.

–Choose shutdown-and-power-offif the server is to be shut down and powered down if the selected fans fail. If you choose this option, you must also specify the time in seconds between failure of the fan and shutdown of the server (Shutdown Delay) in the field to the right of the list.

IIn the case of redundant fans, shutdown is only initiated if more than one fan is faulty and shutdown-and-power-offis also set for these fans.

ÊClick Apply to the selected Fans to activate your settings for the selected fans.

214 iRMC S2/S3