Fujitsu IRMC S2/S3 manual Configuring the LAN interface of the iRMC S2/S3

3 Configuring the iRMC S2/S3

The following tools are available for configuring the iRMC S2/S3:

–BIOS / TrustedCore / UEFI setup utility (see page 44)

–iRMC S2/S3 web interface (see page 135)

–Server Configuration Manager (see page 347)

This chapter provides you with information about the following topics:

–Configuring the LAN interface of the iRMC S2/S3 using the BIOS / TrustedCore / UEFI setup utility (see page 44).

–Configuring text console redirection via LAN using the BIOS / TrustedCore / UEFI setup utility (see page 48).

–Configuring the serial interface of the iRMC S2/S3 using the BIOS / TrustedCore / UEFI setup utility (see page 57).

–Configuring the iRMC S2/S3 over the web interface (for an overview, see page 63).

3.1Configuring the LAN interface of the iRMC S2/S3

This section describes:

–Requirements for configuring the LAN interface

–Configuring the LAN interface in the BIOS / TrustedCore® / UEFI setup utility

–Testing the LAN interface

I"Spanning Tree" tree for the connection of the iRMC S2/S3 must be deactivated (e.g. Port Fast=enabled; Fast Forwarding=enabled).

iRMC S2/S3 41