Fujitsu IRMC S2/S3 manual Dos, Windows Server 2003

Configuring text console redirection via LAN

3.2.3Using console redirection while the operating system is running

Depending on the operating system used on the managed server, you can continue to use console redirection after the BIOS POST phase.

DOS

The BIOS setting for console redirection mode must be set as follows (see section "Settings in the Console Redirection menu" on page 50):

–BIOS setup utility: Mode: Enhanced

–TrustedCore setup utility: Continue C.R. after POST: On

Windows Server 2003 / 2008

IIf activated during Windows installation, console redirection is thereby automatically configured.

If console redirection is activated after Windows installation has completed, you must configure console redirection manually.

Windows Server 2003 / 2008 handles console redirection automatically after the POST phase. No further settings are necessary. While the operating system is booting, the Windows Server 2003 SAC console is transferred:

Figure 15: Windows Server 2003 SAC console

iRMC S2/S3 55