Fujitsu manual IRMC S2/S3 via Telnet/SSH Remote Manager, 321

8iRMC S2/S3 via Telnet/SSH (Remote Manager)

A Telnet-based interface is available for the iRMC S2/S3. This is known as the Remote Manager. You can call the Remote Manager over the following interfaces:

–iRMC S2/S3 web interface (see page 315)

–any Telnet/SSH client

The iRMC S2/S3 supports secure connections over SSH (Secure Shell). The Remote Manager interface is identical for Telnet and SSH connections. In principle, any Telnet/SSH client that interprets VT100 sequences can be used to access the iRMC S2/S3. It is nevertheless recommended that the

iRMC S2/S3 web interface or the ServerView Remote Management Frontend (referred to below simply as the Remote Management Frontend) be used.

IMaximum number of parallel sessions:

–Telnet: up to 4

–SSH: up to 4

–Telnet and SSH in total: up to 4

This chapter describes operation of the iRMC S2/S3 from the Remote Manager and the various functions in detail. The end of the chapter also provides a brief overview of SMASH CLP.

iRMC S2/S3 321