Fujitsu IRMC S2/S3 manual Console Redirection EMS/SAC Start text console redirection

Console Redirection (EMS/SAC)

8.12Console Redirection (EMS/SAC) - Start text console redirection

You can start console redirection with the Console Redirection (EMS/SAC) item from the main menu.

IText-based console redirection only works over the LAN with Serial 1.

If console redirection is also to be used while the operating system is running, the Serial 1 Multiplexer must be set to System.

IUse the keyboard shortcut "<ESC>(" or "~." (tilde dot) to exit the text console.

It is possible that only one of these options will work, depending on the type of PRIMERGY server used.

8.13Start a Command Line shell... - Start a SMASH CLP shell

Start a Command Line shell... in the main menu allows you to start a SMASH CLP shell. SMASH CLP stands for “Systems Management Architecture for Server Hardware Command Line Protocol”. This protocol permits a Telnet- or SSH- based connection between the management station and the managed server. For further details on SMASH CLP, please refer to section "Command Line Protocol (CLP)" on page 343.

When you select (s) Start a Command Line shell... from the main menu, the following window appears:

Figure 209: Remote Manager: Start a SMASH CLP shell... menu

ÊChoose (1) Start a SMASH CLP shell... to start the SMASH CLP shell.

340 iRMC S2/S3