Fujitsu IRMC S2/S3 manual Entering the DSA/RSA certificate/private Dsarsa key directly

iRMC S2/S3 - Information, firmware and certificates

Entering the DSA/RSA certificate/private DSARSA key directly

You do this using the group SSL DSA/RSA certificate or DSA/RSA private upload via copy & paste.

IDo not use this method to load a root certificate onto the iRMC S2/S3. Always load a root certificate using a file (see page 177).

Figure 93: Entering the DSA/RSA certificate/private DSARSA key directly

Proceed as follows:

ÊCopy the X.509 DSA certificate or the private DSA key to the input area.

IYou cannot simultaneously enter the certificate and key for the same upload.

ÊClick Upload to load the certificate or the private key onto the iRMC S2/S3.

ÊUse the Remote Manager to reset the iRMC S2/S3 (see section "Service processor - IP parameters, identification LED and iRMC S2/S3 reset" on page 339).

IThis is necessary in order to make a certificate or private key loaded onto the iRMC S2/S3 valid.

ÊClick View Certificate to make sure that the certificate has been loaded successfully.

178 iRMC S2/S3