Manuals / Mitel / Home Audio / Stereo Amplifier

Mitel manual Install the 3300 ASU, 136

Models: 3300

1 266

Download 266 pages 28.26 Kb

Page 144

3300 ICP Hardware User Guide

3.Complete telephony cabling.

4.Complete programming.

5.Connect power to the 3300 Universal ASU. CIM LEDs will be on once the CIM link syn- chronizes. The 3300 Controller will detect the 3300 Universal ASU, and the application software will download and start immediately.

Install the 3300 ASU

Before you begin, ensure there is a free CIM port on the 3300 Controller.

To install the 3300 ASU:

1.Mount the 3300 ASU in the 19-inch rack (if applicable).

2.Connect the supplied cross-over Category 5 cable with RJ-45 connector to the CIM port on the 3300 ASU and a free CIM port on the 3300 Controller. Up to four ASUs can be connected to a 3300 Controller.

3.Complete telephony cabling.

4.Complete programming.

5.Connect power to the 3300 ASU. CIM LEDs will be on once the CIM link synchronizes. The 3300 Controller will detect the 3300 ASU, and the application software will download and start immediately.

Install the Peripheral Unit

Overview of the Peripheral Unit Installation

To install a Peripheral Unit:

1.Unpack, position, and ground the Peripheral Unit.

2.Check the card layout.

3.Connect the fiber cable to the node.

4.Check the grounding.

5.Install the power converter.

6.Install the Peripheral Interface cards.

7.Cable the node to the MDF.

8.Power up the Peripheral Unit.

Note: For information about removing and replacing the front panel of the cabinet, see Front Panels in the Install Upgrades and FRUs section.

Once you have completed these steps, you can proceed to Installing a DSU Node, Installing a SUPERSET HUB, or return to System Installation Overview.

136	Release 3.3

Image 144

Mitel manual Install the 3300 ASU, 136

Contents

Hardware User Guide Page Specifications Table of ContentsSpecifications Before You BeginICP Hardware User Guide ReleaseInstalling Installing 111146 Install Upgrades and FRUs TroubleshootingProgramming Viii Before You Begin ICP Hardware User Guide Printing the Hardware User Guide Whats New in this Release?Before You Begin ICP ReleaseDisclaimer TrademarksCopyright ICP Hardware User Guide ICP ReleaseSafety Instructions ICP Hardware User Guide Specifications ICP Hardware User Guide Technical Information Technical Characteristics Signaling and Supervisory TonesDtmf Signaling Dtmf Output Signaling as specified by EIA/TIA 464-CLine and Trunk Support Characteristics NA Feature Time-Out Period DescriptionTransmission Characteristics Requirements SpecificationsLoss and Level Matrices ComplianceImplementation Country Requirement DocumentPort Abbreviation Specifications Australia Loss Plan Matrix Brazil Loss Plan MatrixICP Hardware User Guide France Loss Plan Matrix Germany Italy Loss Plan MatrixLatin America Netherlands Loss Plan MatrixSpecifications New Zealand Loss Plan Matrix North America Loss Plan MatrixICP Hardware User Guide Portugal Loss Plan Matrix Spain Loss Plan MatrixTone Plans United KingdomAustralia Tone Plan Tone Frequency Cadence sBrazil Tone Plan Tone Output Level IONSSpecifications ICP Hardware User Guide France Tone Plan Special Busy Special Ringback Transfer Dial Voice Mail Italy ICP Hardware User GuideTone Output Levels IONS Latin America Netherlands Tone Frequency Hz Cadence sNew Zealand Tone Plan Tone Output Levels IONSTone Plan Frequency Cadence s North America IONSIOPS IACO IACOsPortugal Tone Frequency Hz Cadence sSpain Transfer Dial Voice Mail Tone Output Level IONS IACOE2T Compression Conference/ACD Silent Monitor and compression licences Voice mail and compression Music on Hold and compressionController Mitel Networks 3300 100 Controller Components Front PanelRear Panel Internal ComponentsConfigurations User System without Compression User System with 32 Compression Channels User System with 30 Voice Mail Ports Specifications Front Panel Configurations User System without Compression User System with 30 Voice Mail Ports User System with 32 Compression Channels Specifications User System with 64 Compression Channels Specifications User System without Compression User System with 32 Compression Channels User System with 64 Compression Channels Controller Power Mitel Networks 3300 Controller DimensionsController Environment ICP Hardware User Guide Output Power Connector Type Quantity Signals Comments FunctionController PCB Interfaces PCB Printed Circuit Board InterfacesNetwork Services Units Mitel Networks 3300 Universal NSU ComponentsUniversal NSU DIP Switch Settings Hybrid Port DIP Switch SettingsPRI/T1 Mode Connector DIP Switch Settings E1/MF-R2 Mode/Connector DIP Switch SettingsMitel Networks 3300 R2 NSU Components 3300 R2 NSU Protocols3300 R2 NSU DIP Switch Settings Mitel Networks 3300 BRI NSU ComponentsMitel Networks 3300 NSU Dimensions NSU EnvironmentBRI NSU Protocols NSU Power Power SupplyNSU Pin Allocations ICP Hardware User Guide Operational EnvironmentRS-232 Maintenance Connector Allocation BRI Connector AllocationSignal Name RJ-45 Connector Pin Mitel Networks 3300 ASU Components ICP Hardware User GuideASU and Universal ASU Dimensions ASU and Universal ASU EnvironmentASU and Universal ASU Power Power Supply Input SpecificationsCIM Connector Pin Allocations Pair Connector Pin AllocationsONS Line Specifications Specifications Pair Connector Pin AllocationsMusic on Hold Connector Pin Allocations Universal ASU only Paging Connector Pin Assignments Universal ASU onlyONS Transmission Parameters ASU ONS DC Supervision Parameters ASUTransmission Parameters for NA Parameters for UK Transmission Parameters for LA Parameters for EULS Trunk Specifications LS Trunk Features 3300 Universal ASU onlyONS Ringing Parameters ASU ONS Message Waiting Parameters ASUMusic On Hold 3300 Universal ASU only LS Trunk Parameters 3300 Universal ASUASU Variant LS Protocol Trunk Functions Parameters for NA/LA Parameters for UK/EUPaging 3300 Universal ASU only System Fail Transfer 3300 Universal ASU onlyLS Trunk ONS Port Peripheral Node Peripheral Unit Components ICP Hardware User GuideSpecifications Peripheral Unit Dimensions Peripheral Unit EnvironmentPeripheral Unit Power Equipment Power RequirementsPeripheral Unit Cards LS/GS Trunk Card Trunk Card SN-1 and SN-2 Switch Settings OperationFiber Interface Module Specifications 9400-300-301-NA ICP Hardware User Guide Operation DID/Loop Tie Trunk CardDNI Line Card ICP Hardware User Guide ONS Line CardONS Line Card Variant Specifications Feature Germany China IntlONS CLASS/CLIP Line Card OPS Line CardMessage-Waiting Switch Types OPS Line Card SpecificationsSetting Description Dtmf Receiver Card Specifications Dtmf Receiver CardSpecifications Release Digital Service Unit Digital Service Unit Components Digital Service Unit Dimensions Digital Service Unit EnvironmentDigital Service Unit Power EquipmentDigital Service Unit Cards Cept Formatter Card SpecificationCept Formatter Card Card TypeCept Interface Assembly Connector Shield Grounding Conference CardSpecifications Operation Card SpecificationsDS1 Formatter Card DS1/T1 Formatter II CardBasic Rate Interface BRI Card LinkBRI Cable Pinout for 6-port Card BRI Cable Pinout for 15-port CardPair Pin Color Code BRI Port BK/GR Dual Port T1 PRI Universal T1 Card Features Dual Port E1 PRI Universal E1 Card FeaturesAdministration of PRI Card Software Programmable Data Inversion NA onlySoftware Upgrades Multiple Isdn Variants and ConfigurationsR2 signaling Line SignalingR2 Card Register Signaling Signal direction Event Function GroupEvent Group Event Token DescriptionRelease 101 Event Group aPhysical Specifications 102Event Group B R2 Card Specifications Administration of R2 Card SoftwareRelease 103 Telephone Power Options Telephone Power Sources Power Dongle Cisco compliant104 PowerDsine In-line Power Unit Specifications Cisco SwitchesPowerDsine 24PT In-line Power Unit Components Release 105ICP Hardware User Guide Front Panel 106PowerDsine 24PT In-Line Power Unit Dimensions PowerDsine 24PT In-Line Power Unit PowerPower Supply PD-PH-6024/AC/48 PowerDsine 24PT In-Line Power Unit InterfacesICP Hardware User Guide Ethernet Interface Serial Port Interface108 Installing ICP Hardware User Guide 110 Installation Site InstallingRequired Components Release 111Information and Services Parts and Equipment112 ApplicationPower Uninterruptible Power SupplyRelease 113 System Installation Overview Installation PlannerSystem Administration Tool 114Release 115 116 Capacity Hardware CapacityRelease 117 Parameter Name User / 250 User ControllersICP Hardware User Guide Hardware Capacity 118Parameter Name Number Release 119 Install the 3300 Controller 120250 / 700 User Controller Install the Hard Drive Release 121User Controller Install the System ID Module 250 / 700 User ControllerUser Controller 122Install DSP Modules Configure the ControllerRelease 123 Internal Dhcp Server default settings shipped enabled 124Set the 3300 Controller IP Address Release 125Install the 3300 Configuration Tool Hardware Requirements Install the 3300 Configuration Tool126 Install and Configure the Java Plug-In Program FTP User Account and PasswordWindows Click Local Users and GroupsConfigure IIS 5 Settings Assign Domain AccountClick New User Click Local Users and Groups Click GroupsInstall the 3300 Universal NSU Select the Default Web Site Select Action PropertiesSelect Add and Enter default.asp Copy the identitydb.obj fileInstall for PRI/Q.SIG Install Direct Connect Device DriverDriver for Windows 95 and Windows Driver for Windows Release 131Create a Dial-up Network Connection Dial-up Connection for Windows 95 or Windows132 Install the 3300 R2 NSU Dial-up Connection for WindowsRelease 133 Install the 3300 BRI NSU ConnectionsConnect the computer to the 3300 R2 NSU Connect the 3300 R2 NSU to the 3300 ControllerSetting Up the Maintenance PC Install the 3300 Universal ASUNSU Chaining Release 135Install the 3300 ASU 136Unpack, Position, and Ground the Peripheral Unit Peripheral Unit Card LayoutRelease 137 Slot Number Card TypeConnect Fiber Cable to the Peripheral Unit 138Peripheral Unit Grounding Release 139Power Converter 140Install Peripheral Interface Cards Cable the Unit to the MDFAbout Peripheral Interface Cabling Release 141Peripheral Wiring Backplane 142 Usoc Connector Pin Designations Cable ConnectorsUsoc Connector Pin Designations Peripheral Interface Cabling Tables144 Card Connections to Cross-Connect Field Card SlotCard Slot 1 Connections To Cross-Connect Field Release 145Card Slot 2 Connections To Cross-Connect Field 146Card Slot 3 Connections To Cross-Connect Field Release 147Card Slot 4 Connections To Cross-Connect Field 148Release 149 Backplane Code Trunk PlugsCard Slot 5 Connections To Cross-Connect Field 150Card Slot 6 Connections To Cross-Connect Field Release 151Card Slot 7 Connections To Cross-Connect Field 152Card Slot 8 Connections To Cross-Connect Field Release 153Card Slot 9 Connections To Cross-Connect Field 154Card Slot 10 Connections To Cross-Connect Field Release 155Card Slot 11 Connections To Cross-Connect Field 156Card Slot 12 Connections To Cross-Connect Field Release 157Install the Peripheral Slot FIM Carrier 158Install the Superset HUB Release 159Unpack, Position, and Ground the DSU 160DSU Card Layout Connect Fiber Cable to the DSUDSU Card Layout Release 161Install DSU Cards Interface Assembly162 DS1 Interface Assembly and Cabling Cept Interface Assembly and CablingRelease 163 Install Wireless Devices Install Symbol NetVision MiNET Phone Administrator Tool164 Install 3300 ICP as a Stand-alone IP Gateway Release 165Install 3300 ICP as a Stand-alone Voice Mail Install the 3300 In-Line Power Unit166 Powering Up Power-Up LED SequenceRack Mounting Shelf MountingConnecting Cables to the In-Line Power Unit Connecting Cables to End DevicesData & Power Out Ports Data In PortsInstall the 3300 In-Line Power Adapter Install 3300 Power Dongle Cisco compliantRelease 169 Pre-Release 3.2 IP Phones 170Mixed Release 3.1 and 3.2 Network Release 171ICP Hardware User Guide 172 Install Upgrades and FRUs ICP Hardware User Guide 174 Controller Upgrade Options Install Upgrades and FRUsHardware Release 175User System Add Voice Mail Ports 176User System Add 32 Compression Channels Release 177User System Add 32 Compression Channels and Voice Mail Ports 178User System Add Voice Mail Ports Release 179User System Add 32 Compression Channels 180User System Add 32 Compression Channels and Voice Mail Ports Release 181182 User System Add 64 Compression Channels Release 183184 User System Add 64 Compression Channels and Voice Mail Ports Release 185User to 700 User System No Compression Channels 186Release 187 User to 700 User System 32 Compression Channels 188User to 700 User System 64 Compression Channels Release 189User System Add 32 Compression Channels 190Release 191 User System Add 64 Compression Channels 192Release 193 SX-2000 Light to 3300 ICP 194Software Software Upgrade Procedure 3.2 to SX-2000 Micro Light to 3300 ICPICP to 3300 ICP Release 195ICP Hardware User Guide Mitel Options Password Database backupJava Plug-In 196Install Upgrades and FRUs Before you begin You also needRelease 197 ICP Hardware User Guide Upgrade Procedure Overview Backing up the database198 Click System Administration Tool Click Maintenance and Diagnostics, then click Back-upInstalling 3.3 software upgrading Release 199Rebooting Setting your purchased Mitel options200 Restoring the database Release 201Upgrade SX-2000 Light to 3300 ICP Software Performing maintenance checksResetting to initialize Voice Mail Upgrading IP sets and forcing lease renewalsUpgrade SX-2000 Micro Light to 3300 ICP Software Release 203Upgrade 3200 ICP to 3300 ICP Software 204Release 205 206 Release 207 Field Replaceable Units Controller FRUsReplace the Cover 208DSP or Echo Canceller Module Release 209 Dual FIM ModuleHard Drive 210System ID Module User and 700 User ControllersRelease 211 ICP Hardware User Guide User Controller 212Peripheral Node FRUs Remove a Circuit CardICP Hardware User Guide Install a Circuit Card Install a Power Converter214 Release 215 ICP Hardware User Guide Install a Cooling Fan Install an Electronic Filter for Cooling FanInstall a Fiber Interface Module FIM 216Install a Peripheral Switch Controller Card PSC Install a Dual 10Base-T Interface AssemblyInstall a FIM Release 217DSU FRUs Power Down the DSU Power Up the DSU218 Install a BRI Interface Assembly Installation SequenceRelease 219 ICP Hardware User Guide Install a BRI Card 220Install a Cept or DS1 Formatter II Card Testing the CardRelease 221 Install a PRI Card Install for PRI QsigConnect PRI Card to the Network 222Install a Peripheral Resource Card Release 223Install a FIM 224Configure for Line Side/Trunk Side Termination DSU R2 Card R2 Installation OverviewRelease 225 ICP Hardware User Guide Install the R2 Card Connect the R2 card to the Pstn network226 Install Upgrades and FRUs RJ-45 Conncector Pin Functions Field Replaceable Units HardwareRelease 227 Pin FunctionICP Hardware User Guide 228Install Upgrades and FRUs Hardware Release 229Software Options 230 Programming ICP Hardware User Guide 232 Overview of Programming Use ImatRelease 233 From the File menu, select Connect to Remote Site 234Troubleshooting ICP Hardware User Guide 236 Alarms LEDs Troubleshoot the 3300 ControllerFiber Interface Module LEDs Release 237System Hardware Profile Troubleshoot the 3300 Universal NSUMessage Link Controlled Card status Release 239CIM LED State Description LED State MeaningTroubleshoot the 3300 R2 NSU ICP Hardware User Guide Fiber Interface Module LEDsR2 NSU Link Status 240Troubleshoot the 3300 BRI NSU Troubleshoot the 3300 Universal ASUTroubleshoot the 3300 In-Line Power Unit LEDs Power Status IndicationsTroubleshoot the 3300 ASU LS Trunk Circuit LEDsTroubleshooting Main Power Status Indications AC LED GreenUnit Status Indications Alarm LED Orange Release 243Symptom Resolution 244Release 245 On one port is litPeripheral Unit Troubleshoot Fiber Interface Module246 FIM LED State MeaningRelease 247 248 Troubleshoot LS/GS Trunk Card Release 249ICP Hardware User Guide 250 Troubleshoot the ONS Line Card Troubleshoot the ONS CLASS/CLIP CardRelease 251 ICP Hardware User Guide 252Troubleshoot the BRI Card Release 253Troubleshoot the CEPT/DS1 Formatter Card Troubleshoot the Conference CardICP Hardware User Guide BRI LEDs 254Troubleshoot the PRI Card Faceplate LEDsPRI Card Link Status Release 255Troubleshoot the R2 Card R2 Card Link Status256 Troubleshooting OtherRelease 257