Programming
Programming
Overview of Programming
To program the system:
1.Use the 3300 Configuration Tool. Refer to the 3300 Configuration Tool online help for programming information.
2.Use the System Administration Tool. Refer to the System Administration Tool online help for programming information.
3.Use IMAT.
4.Register the IP telephones.
Note: The following options are required in the DHCP server programming:
-3 (Router) Default Gateway IP Address
-6 DNS Server IP Address
-66 TFTP Server ASCII String format (typically the 3300 ICP Controller)
-67 TFTP BootFile (ASCII String = /sysro/e2t8260)
-128 TFTP Server IP address format (typically the 3300 ICP Controller)
-129 RTC IP address format (typically the 3300 ICP Controller)
-130 IP phone DHCP Server (ASCII String = MITEL IP PHONE)
-132 VLAN ID for the voice LAN (Hex - 32 bit word, optional)
-133 Priority, values of
Use IMAT
The IMAT software is used to program hardware and call characteristics for the NSUs that run PRI or R2 protocols. IMAT is also used to install software upgrades.
Maintenance activities include access to the following R2 maintenance information:
•A list of all software files and versions on the 3300 R2 NSU
•Log messages which contain a history of activities and the status of faults
•R2 database.
Use IMAT to backup the database from the 3300 R2 NSU, or to upgrade the R2 software on the 3300 R2 NSU. For more information, refer to the IMAT online Help.
Release 3.3 | 233 |
