![](/images/new-backgrounds/1049431/49431347x1.webp)
3300 ICP Hardware User Guide
Install 3300 ICP as a Stand-alone Voice Mail
The 3300 ICP can be used as a voice mail system adjunct to a legacy or third party PBX.
To install as a
1.Install the 3300 ICP Controller.
2.Install the System ID Module.
3.Connect power to the 3300 Controller. The controller will come up, in 15 to 20 minutes, with
4.To check the connections between the 3300 Controller and the PC: PING the 3300 Controller IP address
FTP to the 3300 Controller IP address
Go to the 3300 Controller URL address (http://192.168.1.2).
5.Launch browser to login to the System Administration Tool (http://192.168.1.2
6.License and Option Selection form
-program number of digital links, voice mail licences, and country variant.
-If OPS Manager is being used to manage the voice mail select Yes in the Networking Option field.
7.Reboot the system.
8.Controller Module Configuration form. Select the Programmed Module Type.
9.Network Services Unit Configuration form. Set the type of NSU and the protocol to be used.
10.Program digital trunks Q.SIG or MSDN/DPNSS
11.Program voice mail as per instructions in System Administration Tool.
12.Perform a Backup.
13.Reboot the system.
14.Set the 3300 Controller (RTC) IP address through a communication program.
15.Install a Universal NSU.
Install the 3300 In-Line Power Unit
The 3300
WARNING: Electrocution Hazard. Before connecting power to the 3300
166 | Release 3.3 |