Bosch Appliances 7000 manual Operation, Using the Autodome Camera, Display Stamping

AutoDome 7000 Series (IP and HD)Operation en 139

15	Operation
15.1	Using the AUTODOME Camera
	The AUTODOME 7000 Series transmits PTZ control commands and images over a TCP/IP
	network. It also allows users to configure the camera display settings, camera operating
	settings, and to configure the network parameters.
	The camera incorporates a network video server in the IP module. The primary function of the
	server is to encode video and control data for transmission over a TCP/IP network. With its H.
	264 encoding, it is ideally suited for IP communication and for remote access to digital video

recorders and multiplexers. The use of existing networks means that integration with CCTV systems or local networks can be achieved quickly and easily. Video images from a single camera can be simultaneously received on several receivers.

LIVEPAGE

Once the connection is established, the Web browser displays the LIVEPAGE. It shows the live video image on the right of the browser window. Depending on the configuration, various text overlays may be visible on the live video image.

Other information may be shown next to live video image on the LIVEPAGE. The display depends on the settings on the LIVEPAGE Configuration page (see the AUTODOME 7000 Series online help).

Display Stamping

Various overlays or “stamps” in the video image provide important status information. The overlays provide the following information:

Decoding error. The frame might show artifacts due to decoding errors. If subsequent frames reference this corrupted frame, they might also show decoding errors as well but won’t be marked with the “decoding error” icon.

Alarm flag set on media item

Communication error. Any kind of communication error is visualized by this icon. Cause can be a connection failure to the storage medium, a protocol violation with a sub component or simply a timeout. An automatic reconnection procedure is started in the background in order to recover from this error.

Gap; no video recorded

Watermarking not valid

Watermarking flag set on media item

Motion flag set on media item

Discovery of storage not completed. If the information about recorded video is not cached, a discovery procedure is started in order find all recorded video. During this time, the “discovery” symbol is shown. While discovery is executed, gaps might be shown in places which the discovery has not yet reached. The gap will automatically be replaced by the true video, as soon as the correct information is available.

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679