AutoDome 7000 Series (IP and HD)

Configuration via IP, Advanced Mode en 91

 

 

1.Select the desired option from the list.

2.If you select the Custom option, additional fields are displayed where you can specify the exact position (Position (XY)).

3.In the Position (XY) fields, enter the values for the desired position.

Display milliseconds

If necessary, you can also display milliseconds. This information can be useful for recorded video images; however, it does increase the processor's computing time. Select Off if you do not need to display milliseconds.

Alarm mode stamping

Select On to display a text message overlay in the image in the event of an alarm. It can be displayed at a position of your choice that you can then specify using the Custom option. Or it can be set to Off for no overlay information.

1.Select the desired option from the list.

2.If you select the Custom option, additional fields are displayed where you can specify the exact position (Position (XY)).

3.In the Position (XY) fields, enter the values for the desired position.

Alarm message

Enter the message to be displayed in the image in the event of an alarm. The maximum text length is 31 characters.

Title OSD

Select On to continuously display sector or shot title overlays in the image. Select Momentary to display sector or shot title overlays for a few seconds. OSD titles can be displayed at a position of your choice, or it can be set to Off for no overlay information.

1.Select the desired option from the list.

2.Specify the exact position (Position (XY)).

3.In the Position (XY) fields, enter the values for the desired position.

Camera OSD

Select On to momentarily display camera response information, such as Digital Zoom, Iris open/close, and Focus near/far overlays in the image. Select Off to display no information.

1.Select the desired option from the list.

2.Specify the exact position (Position (XY)).

3.In the Position (XY) fields, enter the values for the desired position.

Video watermarking

Choose On if you wish the transmitted video images to be “watermarked”. After activation, all images are marked with a green check. A red check indicates that the sequence (live or saved) has been manipulated.

14.6

Advanced Mode: Web Interface

Bosch Security Systems

Operation Manual

2013.07 1.2.2 F.01U.283.679

Page 91
Image 91
Bosch Appliances 7000 manual Advanced Mode Web Interface