Bosch Appliances 7000 Fixed Gain, Maximum Gain Level, Normal Medium, AE-response speed, Sharpness

AutoDome 7000 Series (IP and HD) Configuration via IP, Advanced Mode en 103

If you select this option, the camera makes the following changes automatically:

–Night Mode: switches to Color

–Auto Iris: switches to Constant

Fixed Gain

Use the slide to select the desired number for fixed gain. The default is 2.

Maximum Gain Level

Controls the maximum value the gain can have during AGC operation. To set the maximum gain level, choose from:

–Normal

–Medium

–High (default)

AE-response speed

Select the speed of the response of auto exposure. Options are Super slow, Slow, Medium (default), Fast.

Sharpness

Adjusts the sharpness of the picture. To set the sharpness, use the slider to select a number. The default is 12.

Shutter Mode

–Off: turns the Auto SensUP Off.

–AutoSensUp: increases camera sensitivity by increasing the integration time on the camera. This is accomplished by integrating the signal from a number of consecutive video frames to reduce signal noise.

If you select this option, the camera makes the following change automatically:

–Auto Iris: switches to Constant

–Shutter: is disabled

Shutter

Adjusts the electronic shutter speed (AES). Controls the time period for which light is gathered by the collecting device. The default setting is 1/60 second for NTSC and 1/50 for PAL cameras. The range of settings is from 1/1 to 1/10000.

Backlight compensation

Optimizes the video level for the selected area of the image. Parts outside this area may be underexposed or overexposed. Select On to optimize the video level for the central area of the image. The default setting is Off.

High Sensitivity

Adjusts the level of intensity within the image (HD only). Select from Off or On.

Stabilization

Turns on video stabilization (if the camera has the stabilization feature).

High dynamic range

Turns on the wide dynamic range feature. Wide Dynamic Range improves image reproduction in extreme high-contrast environments. Select from Off, On, or Auto.

Night mode

Selects night mode (B/W) to enhance lighting in low light scenes. Select from the following options:

–Monochrome: Forces the camera to stay in Nigh Mode and transmit monochrome images.

–Color: The camera does not switch to Night Mode regardless of ambient light conditions.

–Auto (default): The camera switches out of Night Mode after the ambient light level reaches a pre-defined threshold.

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679