152 en Operation

AutoDome 7000 Series (IP and HD)

 

 

If the direct-connect method is not practical you can also update the HD camera through a Local Area Network (LAN). You cannot, however, update the camera through a Wide Area Network (WAN) or via the Internet.

Beginning the Firmware Update Process

Use this procedure to connect to your AUTODOME HD camera and to navigate to the Firmware Update page.

1.Launch Internet Explorer, type the IP address for the camera in the Address bar and click Go.

Internet Explorer opens the LIVEPAGE view.

2.Click the SETTINGS link, located at the top of the page.

3.Click the Service link in the left pane.

4.Click the Maintenance link below the Service link.

5.Click the Search button and navigate to the firmware file (*.fw). Click OK.

6.Click the Upload button.

7.Click OK to the warning message to continue the firmware upload, or Cancel to stop the upload.

The page displays a progress bar as the firmware is uploaded.

Note: Once the progress bar reaches 100% the system opens the reset page. Allow the reset page to complete its action.

8.Once the reset is complete, the upgrade is complete.

2013.07 1.2.2 F.01U.283.679

Operation Manual

Bosch Security Systems

Page 152
Image 152
Bosch Appliances 7000 manual Beginning the Firmware Update Process