Bosch Appliances 7000 manual Installing the In-Ceiling Mount, Dimensions

AutoDome 7000 Series (IP and HD)Installing the In-Ceiling Mount en 57

9	Installing the In-Ceiling Mount
9.1	Description
	This chapter details how to install the camera in an In-Ceiling Mount. The In-Ceiling
	AUTODOME camera is suitable for use in environmental air spaces. Refer to Installing the
	Pendant Arm Wall, Corner, and Mast (Pole) Mounts, page 24, or refer to Installing the Roof
	Parapet and Pipe Mounts, page 40 for these specific installations.
9.2	Dimensions

95.88

[3.775]

HD

	206.89
	[8.145]
	21.29
	[0.838]
	99.76
	[3.928]
	IP
	74.65
Ø 204.49	[2.939]
[8.051]	HD
	78.04
	[3.072]
	IP

Ø 175.99

[6.929]

MM [IN.]

Figure 9.1: In-Ceiling Dimensions

9.3	Prepare Drywall Ceiling for Installation
	1.	Choose the desired location to mount the camera.
	2.	Use the bracket Base Plate as a template to cut a 7 in. hole with a tolerance of ±1/8 in.
		(177.8 mm ±2.2 mm) in the ceiling with a drywall utility saw or Jig Saw. Proceed to Wire
		the Interface Box, page 59, for further instructions.
9.4	Prepare Suspension Ceiling for Installation

You must use the VGA-IC-SP In-ceiling Support Kit to install the camera In-ceiling housing into a suspended or drop ceiling. This kit requires a separate purchase.

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679