Bosch Appliances 7000 Configuration via IP, Basic Mode, Basic Mode Device Access, Camera name

84 en Configuration via IP, Basic ModeAutoDome 7000 Series (IP and HD)

13	Configuration via IP, Basic Mode
	All parameter groups are described in this chapter in the order in which they are listed in the
	configuration menu, from the top of the screen to the bottom.
13.1	Basic Mode: Device Access
	Camera name
	You can give the camera a name to make it easier to identify. The name makes the task of
	administering multiple units in larger video monitoring systems easier, for example using the
	Bosch Video Management Systems programs.
	The device name is used for the remote identification of a unit, in the event of an alarm for
	example. For this reason, enter a name that makes it as easy as possible to quickly identify the
	location.
	Caution!
!	Do not use any special characters, for example &, in the name.
	Special characters are not supported by the system's internal recording management and may

therefore result in the Player or Archive Player being unable to play back the recording.

Password

An AUTODOME 7000 Series camera is generally protected by a password to prevent unauthorized access to the unit. You can use different authorization levels to limit access. The camera operates with three authorization levels: service, user and live.

The highest authorization level is service. After entering the correct password, you can access all the functions of the camera and change all configuration settings.

With the user authorization level, you can operate the unit and also control cameras, for example, but you cannot change the configuration.

The lowest authorization level is live. It can only be used to view the live video image and switch between the different live image displays.

You can define and change a password for each authorization level if you are logged in as service or if the unit is not password protected.

Enter the password for the appropriate authorization level here.

Notice!

Proper password protection is only guaranteed when all higher authorization levels are also protected with a password. If a live password is assigned, for example, a service and a user password must also be set. When assigning passwords, you should therefore always start from the highest authorization level, service, and use different passwords.

Confirm password

In each case, enter the new password a second time to eliminate typing mistakes.

Notice!

A new password is only saved when you click the Set button. You should therefore click the Set button immediately after entering and confirming a password.

2013.07 1.2.2 F.01U.283.679 Operation Manual Bosch Security Systems