Bosch Appliances 7000 manual Privacy Masks, Preview, Jpeg stream

AutoDome 7000 Series (IP and HD)Configuration via IP, Advanced Mode en 101

AUTODOME IP Profiles	AUTODOME HD Profiles
DSL	SD high quality / low latency
ISDN (1B)	SD high quality
Modem	SD low bandwidth
GSM	DSL
	ISDN (2B)

Refer to Encoder Profile, page 96, for more details about each stream.

Preview

Click the Preview button to open a small static preview window for each stream. To enlarge the preview and view live video, click the 1:1 Live View button.

JPEG stream

Select the resolution, frame rate, and image quality parameters for the M-JPEG stream.

–Resolution: Select the appropriate resolution.

–Max. frame rate: Select one of the following frame rates to be the maximum: 5, 10, 15, 20, 25, or 30 ips.

–Picture quality: his setting allows you to adjust the image quality. Use the slide bar to choose a quality between Low and High.

14.14Privacy Masks

Privacy Masking is used to block out a specific area of a scene from being viewed. Masks can be configured as a gray area with four corners. You may define a total of 24 privacy masks.

Notice!

The camera disables the Privacy Mask feature if the orientation of the camera is set to

Inverted. Refer to Installer Menu, page 94, for orientation settings.

To add a privacy mask to a scene:

1.Navigate to the scene in which you want to apply a privacy mask. Click the View Control link.

Use the PTZ controls to view the scene.

2.Select the privacy mask number to apply to the scene.

3.The preview window displays a gray rectangle in the scene.

4.Click the Enabled check box to activate the privacy mask.

5.The privacy mask in the preview window changes to orange to indicate that the mask will appear in the video streams on the LIVEPAGE.

6.Place the cursor inside the privacy mask area in the preview window; then click and drag to move the privacy mask.

7.Place the cursor on a corner or on a vertex of the mask rectangle; then click and drag to expand or shrink the privacy mask area.

Notice!

Draw the mask 10% larger than the object to ensure that the mask completely covers the object as the camera zooms in and out. Click the Zoom threshold box.

Draw the mask at 50% optical zoom or less for improved masking performance.

8.Click Set to save the privacy mask size and position. An image window displays the privacy mask.

9.To hide an individual mask, select the mask number and clear the Enabled check box.

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679