Bosch Appliances 7000 manual Dsl

AutoDome 7000 Series (IP and HD)Configuration via IP, Advanced Mode en 97

AUTODOME IP Profiles	AUTODOME HD Profiles
High resolution 1	HD Image Optimized
Target bit rate: 2000 kbps	Target bit rate: 2000 kbps
Maximum bit rate: 4000 kbps	Maximum bit rate: 4000 kbps
Encoding interval: 30.00 ips	Encoding interval: 30.00 ips
High resolution 2	HD Balanced
Target bit rate: 1500 kbps	Target bit rate: 4000 kbps
Maximum bit rate: 3000 kbps	Maximum bit rate: 7000 kbps
Encoding interval: 30.00 ips	Encoding interval: 30.00 ips
Low bandwidth	HD Bit Rate Optimized
Target bit rate: 700 kbps	Target bit rate: 25000 kbps
Maximum bit rate: 1500 kbps	Maximum bit rate: 4500 kbps
Encoding interval: 30.00 ips	Encoding interval: 30.00 ips
DSL	SD Image Optimized
Target bit rate: 400 kbps	Target bit rate: 3300 kbps
Maximum bit rate: 500 kbps	Maximum bit rate: 5000 kbps
Encoding interval: 30.00 ips	Encoding interval: 30.00 ips
ISDN (1B)	SD Balanced
Target bit rate: 40 kbps	Target bit rate: 1300 kbps
Maximum bit rate: 50 kbps	Maximum bit rate: 2600 kbps
Encoding interval: 30.00 ips	Encoding interval: 30.00 ips
Modem	SD Bit Rate Optimized
Target bit rate: 20 kbps	Target bit rate: 750 kbps
Maximum bit rate: 22 kbps	Maximum bit rate: 1500 kbps
Encoding interval: 30.00 ips	Encoding interval: 30.00 ips
GSM	DSL Optimized
Target bit rate: 7 kbps	Target bit rate: 380 kbps
Maximum bit rate: 8 kbps	Maximum bit rate: 500 kbps
Encoding interval: 30.00 ips	Encoding interval: 30.00 ips
	3G Optimized
	Target bit rate: 80 kbps
	Maximum bit rate: 100 kbps
	Encoding interval: 30.00 ips

You can change individual parameter values of a profile and you can also change the name. You can switch between profiles by clicking the appropriate tabs.

Caution!

The profiles are rather complex. They include a large number of parameters that interact with one another, so it is generally best to use the default profiles.

! Change the profiles only once you are fully familiar with all the configuration options. In the default setting, Stream 2 is transmitted for alarm connections and automatic connections. Bear this fact in mind when assigning the profile.

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679