Bosch Appliances 7000 manual Advanced Mode Service Maintenance

AutoDome 7000 Series (IP and HD) Configuration via IP, Advanced Mode en 137

14.50Advanced Mode: Service

14.51Maintenance

Update server

Enter the path of the server on which to perform the update. Click Check to verify the path.

Firmware

The camera is designed in such a way that its functions and parameters can be updated with firmware. To do this, transfer the current firmware package to the unit via the selected network. It will then be automatically installed there.

In this way, a camera can be serviced and updated remotely without a technician having to change the installation on site.

Caution!

Before launching the firmware upload make sure that you have selected the correct upload file. Uploading the wrong files can result in the unit no longer being addressable, in which case you must replace the unit.

! You should never interrupt the installation of firmware. An interruption can lead to the flash- EPROM being incorrectly programmed. This in turn can result in the unit no longer being addressable, in which case it will have to be replaced. Even changing to another page or closing the browser window leads to an interruption.

Upload

1. Enter the full path of the file to upload or click Browse to select the required file.

2. Make certain that the file to be loaded comes from the same unit type as the unit you want to configure.

3. Next, click Upload to begin transferring the file to the unit. The progress bar allows you to monitor the transfer.

Once the upload is complete, the new configuration is activated. The time remaining is shown by the message going to reset Reconnecting in ... seconds. The unit reboots automatically once the upload has successfully completed.

Download

1.Click the Download button. A dialog box opens.

2.Follow the on-screen instructions to save the current settings.

Configuration

You can save configuration data for the camera on a computer and then load saved configuration data from a computer to the unit.

SSL certificate

To be able to work with an SSL encrypted data connection, both ends of a connection must hold the relevant certificates. You can upload the SSL certificate, comprising one or multiple files, onto the camera.

If you wish to upload multiple files onto camera, you must select them consecutively.

1.Enter the full path of the file to upload or click Browse to select the required file.

2.Next, click Upload to begin transferring the file to the unit.

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679