Bosch Appliances 7000 manual About the Settings, Basic Mode menu

AutoDome 7000 Series (IP and HD) Configuration en 81

4Configure the settings on this page based on the addresses provided by your local network administrator.

Notice!

Click the Help on this page? link if you need more information.

4Click Set and Reboot. The camera will reset (go through the homing sequence, which usually takes 30 seconds to complete), and then the LIVEPAGE appears, with updated video and the new IP address.

NOTE: Screenshots of configuration settings in this manual are from an AUTODOME 7000 HD model. Because of firmware or software updates, the screenshots may differ slightly from the configuration settings screens in your system. Every effort has been made to ensure that the information in this manual is accurate and current.

About the SETTINGS Page

The SETTINGS page provides access to the configuration menu, which contains all the unit's parameters arranged in groups. You can view the current settings by opening one of the configuration screens. You can change the settings by entering new values or by selecting a predefined value from a list field.

There are two options for configuring the unit or checking the current settings:

–Basic mode

–Advanced mode

In Basic Mode, the most important parameters are arranged in seven groups. This allows you to change the basic settings with just a few entries and then put the device into operation.

Figure 12.2: Basic Mode menu

Advanced Mode is recommended for expert users or system support personnel. You can access all unit parameters in this mode. Settings that affect the fundamental functionality of the unit (such as firmware updates) can only be altered in the advanced mode.

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679