Bosch Appliances 7000 manual Image Resolution, Processor Load, Selecting Recordings

AutoDome 7000 Series (IP and HD) Operation en 145

1.Click the icon again to stop recording.

2.To change the storage location for the recorded video, navigate to the LIVEPAGE settings on the SETTINGS page.

Image Resolution

Sequences are saved at the resolution that has been preset in the configuration for the encoder (see Basic Mode: Network, page 85).

Processor Load

If the camera is accessed via the Web browser, you will see the processor load indicator in the top left of the window next to the manufacturer's logo.

You can obtain additional information to help when you troubleshoot or fine-tune the unit. The values indicate the proportions of the individual functions on the encoder load, shown as percentages.

4Move the cursor over the graphic indicator. Some additional numerical values are also displayed.

Accessing Recorded Video from the Recordings Page / PLAYBACK

Click Recordings to access the Recordings page from the LIVEPAGE or SETTINGS page (the Recordings link is only visible if a storage medium has been selected).

Figure 15.3: Playback page

Selecting Recordings

All saved sequences are displayed in a list. A track number is assigned to each sequence. Start time and stop time, recording duration, number of alarms, and recording type are displayed.

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679