AutoDome 7000 Series (IP and HD)

Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts en 39

 

 

4.Hold the Pendant housing in position while tightening the two (2) 5-mm Allen head mounting screws on top of the housing to 10-12N-m(90-105in.-lbs).

Caution!

!You must tighten the two mounting screws to a minimum torque of 10-12 N-m (90105 in.-lbs) to ensure a proper seal between the arm and the housing.

Bosch Security Systems

Operation Manual

2013.07 1.2.2 F.01U.283.679

Page 39
Image 39
Bosch Appliances 7000 manual Bosch Security Systems 2013.07 1.2.2 F.01U.283.679