AutoDome 7000 Series (IP and HD)

Configuration via IP, Advanced Mode en 89

 

 

14.3 Password

An AUTODOME camera is generally protected by a password to prevent unauthorized access to the unit. You can use different authorization levels to limit access.

Notice!

Proper password protection is only guaranteed when all higher authorization levels are also protected with a password. If a live password is assigned, for example, a service and a user password must also be set. When assigning passwords, you should therefore always start from the highest authorization level, service, and use different passwords.

Password

The camera operates with three authorization levels: service, user and live.

The highest authorization level is service. After entering the correct password, you can access all the functions of the camera and change all configuration settings.

With the user authorization level, you can operate the unit and also control cameras, for example, but you cannot change the configuration.

The lowest authorization level is live. It can only be used to view the live video image and switch between the different live image displays.

You can define and change a password for each authorization level if you are logged in as service or if the unit is not password protected.

Enter the password for the appropriate authorization level here.

Confirm password

In each case, enter the new password a second time to eliminate typing mistakes.

Notice!

A new password is only saved when you click the Set button. You should therefore click the Set button immediately after entering and confirming a password.

14.4 Date/Time

Date format

Select your required date format.

Device date/Device time

Notice!

Ensure that recording is stopped before synching to the PC.

If there are multiple devices operating in your system or network, it is important to synchronize their internal clocks. For example, it is only possible to identify and correctly evaluate simultaneous recordings when all units are operating on the same time.

1.Enter the current date. Since the unit time is controlled by the internal clock, there is no need to enter the day of the week – it is added automatically.

2.Enter the current time or click the Sync to PC button to copy your computer's system time to the camera.

Device time zone

Select the time zone in which your system is located.

Bosch Security Systems

Operation Manual

2013.07 1.2.2 F.01U.283.679

Page 89
Image 89
Bosch Appliances 7000 manual Password, Date/Time, Date format, Device date/Device time, Device time zone