Bosch Appliances 7000 manual VG4-A-PSU1 or VG4-A-PSU2 Power Supply Box

AutoDome 7000 Series (IP and HD) Installing the Roof Parapet and Pipe Mounts en 41

J101

(FUSE) XF101

P101

LINE NC NEUT

P106
GND TXD RXD	C+	C-

		J102		XF103
		P107	HTRDOME	5 4 3 2 1
			J103	XF102
			(LED)
P105
GND TXD RXD	C+	C-

(FUSE)(FUSE)

Figure 8.1: VG4-A-PSU1 or VG4-A-PSU2 Power Supply Box

1	120 VAC/230 VAC Power In	6	Control Wire
			Used for Audio input and output in
			AUTODOME 7000 Series.
2	P101 Connector	7	24 VAC Power Out
3	Ground Connection	8	P107 Connector
4	Transformer	9	Earth-grounded conduit with power input
			and earth-ground connection
5	Ethernet Wire	10	Earth-grounded conduit with Ethernet
			video/control, audio input and output to
			“head-end“ system
		11	Earth-grounded conduit to camera

Method Two is to bypass the Power Supply Box and route the video, control, and alarm wires directly to the Interface Board. You connect only the power wires inside the Power Supply Box. All conduit and junction boxes used must be electrically earth-grounded.

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679