Bosch Appliances 7000 manual Connector Pin, Serial Code CODE+, Rxd Txd, Communications, Gnd

AutoDome 7000 Series (IP and HD)Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts en 27

Fuse Specifications

Volts	XF101 Mains	XF102 Camera	XF103 Heater
24 V	T 5.0 A	T 2.0 A	T 3.15 A
115 V	T 1.6 A	T 2.0 A	T 3.15 A
230 V	T 0.8A	T 2.0 A	T 3.15 A

Warning!

! Fuse replacement by qualified service personnel only. Replace with same type fuse.

Fuse Specifications

Volts	XF101 Mains	XF102 Camera	XF103 Heater
24 V	T 5.0 A	T 2.0 A	T 3.15 A
115 V	T 1.6 A	T 2.0 A	T 3.15 A
230 V	T 0.8A	T 2.0 A	T 3.15 A

The following table lists the Power Supply Box connectors:

No.	Connector	Pin 1	Pin 2	Pin 3		Pin 4	Pin 5	Pin 6
	Ground	Grounding Screw
P101	115/230 VAC or	Line	NC	Neutral
	24 VAC Power In
P106	SERIAL	CODE-	CODE+	Earth GND	RXD		TXD	Signal
	COMMUNICATIONS	(Audio IN-,	(Audio IN+)	(Ground)	(Audio OUT+)		(Audio OUT-;	GND
		Audio in		(Audio)			Audio out	(Ground)
		signal					signal
		ground)					ground)
P107	24 VAC Power	Camera	Camera	Earth	Heater		Heater
	(Arm Harness)	24 VAC	24 VAC	Ground	(24 VAC)		(24 VAC)

Table 7.1: Power Supply Box Connections

Notice!

Pins for P106 1, 2, 4, and 5 are used for audio input and output for AUTODOME 7000 Series cameras; however, their labels are still those of previous versions of analog AUTODOME cameras.

Warning!

For units intended to be installed outdoors: All wiring (power and I/O cabling) connecting to

! the unit must be routed separately inside different permanently earthed metal conduits (not supplied).

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679