Bosch Appliances 7000 manual Lens Settings

104 en Configuration via IP, Advanced Mode AutoDome 7000 Series (IP and HD)

Night mode threshold

Adjusts the level of light at which the camera automatically switches out of night mode (B/W) operation. Select a value between 10 and 55 (in increments of 5), where 10 is earlier and 55 is later.

Noise Reduction

Turns on the 2D and 3D noise reduction feature.

Noise Reduction Level

Adjusts the noise level to the appropriate level for shooting conditions. Select a value between 1 and 5.

14.16Lens Settings

Autofocus

Continuously adjusts the lens automatically to the correct focus for the sharpest picture.

–One Push (default; commonly called “Spot Focus”): activates the Auto Focus feature after the camera stops moving. Once focused, Auto Focus is inactive until the camera is moved again.

–Auto Focus: Auto Focus is always active.

–Manual: Auto Focus is inactive.

Warning!

! For tours, save presets using One Push (“Spot Focus“).

Focus polarity

– Normal (default): focus controls operate normally.

– Reverse: focus controls are reversed.

Focus speed

Use the slider (from 1 to 8) to control how fast the Auto focus will readjust when the focus becomes blurred.

Auto iris

Automatically adjusts the lens to allow the correct illumination of the camera sensor. This type of lens is recommended for use where there are low light or changing light conditions.

–Constant (default): camera constantly adjusts to varying light conditions (default). If you select this option, the camera makes the following changes automatically:

–Gain Control: switches to AGC.

–Shutter Speed: switches to default.

–Manual: camera must be manually adjusted to compensate for varying light conditions.

Iris polarity

Capability to reverse the operation of the iris button on the controller.

–Normal (default): iris controls operate normally.

–Reverse: iris controls are reversed.

Auto iris level

Increases or decreases brightness according to the amount of light. Type a value between 1 and 15.

Maximum zoom speed Controls the zoom speed.

Zoom polarity

Capability to reverse the operation of the zoom button on the controller.

–Normal (default): zoom controls operate normally.

–Reverse: zoom controls are reversed.

2013.07 1.2.2 F.01U.283.679 Operation Manual Bosch Security Systems