Bosch Appliances 7000 Livepage Special Functions, Scan, Autopan, Findhome, Showhome, Refocus

144 en Operation AutoDome 7000 Series (IP and HD)

LIVEPAGE Special Functions

The camera offers special command buttons on the LIVEPAGE.

Scan 360

Click this button to start a continuous 360° pan. To stop the continuous pan, click a directional control in the View Control tab.

Autopan

Click this button to pan the camera between user-defined limits. To set the left and right pan limits, refer to PTZ Settings in the Operator Manual. To stop the continuous pan, click a directional control in the View Control tab.

Tour A / Tour B

Click one of these buttons to start the playback of a recorded (guard) tour. A Recorded Tour saves all manual camera movements made during the recording, including its rate of pan, tilt and zoom speeds and other lens setting changes. To program a recorded tour, refer to PTZ Settings. To stop a tour, click a directional control in the View Control tab.

Warning!

! Save presets using One Push (“Spot Focus“). Refer to Lens Settings, page 104.

Findhome

Click the Findhome button to recalibrate the home position for the camera.

Showhome

Click the Showhome button to display the current home position.

Refocus

Click the Refocus button to issue the One Push focus command. One Push activates the Auto Focus feature after the camera stops moving.

Saving Snapshots

You can save individual images from the video sequence currently shown on the LIVEPAGE in JPEG format on your computer's hard drive. The icon for recording single images is only visible if the unit is configured to enable this process.

4 Click the icon. The storage location depends on the configuration of the camera.

Recording Video Sequences

You can save sections of the video sequence currently shown on the LIVEPAGE on your computer's hard drive. The icon for recording video sequences is only visible if the unit is configured to enable this process.

4 Click the icon to start recording. The storage location depends on the configuration of the camera. A red dot in the icon indicates that recording is in progress.

2013.07 1.2.2 F.01U.283.679 Operation Manual Bosch Security Systems