Bosch Appliances 7000 Configuration via IP, Advanced Mode, Advanced Mode General Identification

88 en Configuration via IP, Advanced ModeAutoDome 7000 Series (IP and HD)

14	Configuration via IP, Advanced Mode
	All parameter groups are described in this chapter in the order in which they are listed in the
	configuration menu, from the top of the screen to the bottom.
	See also
	– Configuration via IP, Advanced Mode, page 88
14.1	Advanced Mode: General

14.2 Identification

Camera name

The camera name makes it easier to identify the remote camera location, in the event of an alarm for example. It will be displayed in the video screen if configured to do so. The camera name makes the task of administering cameras in larger video monitoring systems easier, for example using the BVC or Bosch Video Management Systems Programs.

Enter a unique, unambiguous name for the camera in this field. You can use both lines for this.

Caution!

Do not use any special characters, for example &, in the name.

! Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording.

You can use the second line for entering additional characters; these can be selected from a table.

1. Click the icon next to the second line. A new window with the character map is opened.

2. Click the required character. The character is inserted into the Result field.

3. In the character map, click the << and >> icons to move between the different pages of the table, or select a page from the list field.

4. Click the < icon to the right of the Result field to delete the last character, or click the X icon to delete all characters.

5. Now click the OK button to apply the selected characters to the second line of the Camera 1 parameters. The window will close.

Camera ID

Each AUTODOME 7000 Series should be assigned a unique identifier that you can enter here as an additional means of identification.

Initiator extension

You can attach your own text to the initiator name of the camera to make the unit easier to identify in large iSCSI systems. This text is added to the initiator name, separated from it by a full stop. You can see the initiator name in the System Overview page.

2013.07 1.2.2 F.01U.283.679 Operation Manual Bosch Security Systems