3Com MSR 30, MSR 50 manual # Display the statistics of OSPFv3 routing table

1292 CHAPTER 84: IPV6 OSPFV3 CONFIGURATION COMMANDS

Parameters process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535. ipv6-address: IPv6 address prefix.

prefix-length: Prefix length, in the range 0 to 128.

abr-routes: Specifies to display routes to ABR.

asbr-routes: Specifies to display routes to ASBR.

all: Specifies to display all routes.

statistics: Specifies to display the statistics of OSPFv3 routing table.

Description Use the display ospfv3 routing command to display OSPFv3 routing table information.

If no process is specified, routing table information of all OSPFv3 processes is displayed.

Examples # Display OSPFv3 routing table information.

<Sysname> display ospfv3 routing

E1	-	Type	1	external	route,	IA	-	Inter area route,	I - Intra area route
E2	-	Type	2	external	route,	*	-	Selected route

OSPFv3 Router with ID (1.1.1.1) (Process 1)

------------------------------------------------------------------------

*Destination: 2001::/64

Type	: I	Cost	: 1
NextHop	: directly-connected	Interface: Eth1/0
Table 311 Description on the fields of the display ospfv3 routing command
Field		Description
Destination		Destination network segment
Type		Route type
Cost		Route cost value
Next-hop		Next hop address
Interface		Outbound interface

# Display the statistics of OSPFv3 routing table.

<Sysname> display ospfv3		routing statistics
OSPFv3 Router with ID (1.1.1.1) (Process 1)
		OSPFv3 Routing Statistics
Intra-area-routes :		1
Inter-area-routes	:	0
External-routes	:	0

Table 312 Description on the fields of the display ospfv3 routing statistics command

Field	Description
Intra-area-routes	Number of Intra-area-routes
Inter-area-routes	Number of inter-area routes
External-routes	Number of external routes