3Com MSR 30, MSR 50 manual Display atm interface, Syntax display atm interface atm interface-number

294CHAPTER 19: ATM CONFIGURATION COMMANDS

Table 23 Description on the fields of the display atm class command

Field	Description
Service ubr 8000	The PVC’s service type and the bit rate
encapsulation aal5snap	The type of ATM AAL5 encapsulation of the PVC is
	aal5snap.

display atm interface

Syntax display atm interface [ atm interface-number]

View Any view

Parameter interface-number: Specifies an ATM interface to view the detailed information about.

Description Use the display atm interface command to display detailed information about ATM interface.

Note that:

If you provide the interface-numberargument, this command displays the information about the ATM interface identified by the argument.

If you do not provide the argument, this command displays the information about all the ATM interfaces.

Example # Display the information about ATM 4/0 interface.

<Sysname> display atm interface atm 4/0 ATM interface Atm4/0, State UP

Port Information:

Maximum VCs: 1024

PVCs: 5, MAPs: 1

input pkts: 11603, input bytes: 426476, input pkt errors: 37092

output pkts: 14053, output bytes: 519106, output pkt errors: 0

Main interface Information:

PVCs: 4, MAPs: 1

input pkts: 11603, input bytes: 426476, input pkt errors: 19210

output pkts: 14053, output bytes: 519106, output pkt errors: 0

ATM interface Atm4/0.1, point-to-point, State UP

Sub-interface Information:

PVCs: 1, MAPs: 0

input pkts: 0, input bytes: 0, input pkt errors: 17880

output pkts: 0, output bytes: 0, output pkt errors: 0

Table 24 Description on the fields of the display atm interface command

Field	Description
ATM interface Atm6/0/0, State UP	Name and state of the interface
Maximum VCs	Maximum number of VCs on the ATM
	interface