3Com MSR 50, MSR 30 manual Ospf authentication-mode, Undo ospf process-id, 1143

1143

Use the undo opaque-capabilitycommand to restore the default.

The feature is disabled by default.

Examples # Enable advertising and receiving opaque LSAs.

<Sysname> system-view

[Sysname] ospf 100

[Sysname-ospf-100]opaque-capability enable

ospf

Syntax ospf [ process-id router-idrouter-id vpn-instanceinstance-name ]*

undo ospf process-id

View System view

Parameters process-id: OSPF process ID, in the range 1 to 65535. router-id: OSPF router ID, in dotted decimal format.

instance-name: VPN instance name, a string of 1 to 31 case-sensitive characters.

Description Use the ospf command to enable an OSPF process.

Use the undo ospf command to disable an OSPF process.

No OSPF process is enabled by default.

You can enable multiple OSPF processes on a router and specify different Router

IDs for these processes.

When using OSPF as the IGP for MPLS VPN implementation, you need to bind the

OSPF process with a VPN instance.

Enabling OSPF first is required before performing other tasks.

Examples # Enable OSPF process 100 and specify Router ID as 10.10.10.1.

<Sysname> system-view

[Sysname] ospf 100 router-id 10.10.10.1

[Sysname-ospf-100]

ospf authentication-mode

Syntax For MD5/HMAC-MD5 authentication:

ospf authentication-mode { md5 hmac-md5 } key-id[ plain cipher ] password

undo ospf authentication-mode { md5 hmac-md5 } key-id