3Com MSR 50, MSR 30 IPV6 Static Routing Configuration Commands, Delete ipv6 static-routes all

IPV6 STATIC ROUTING

86 CONFIGURATION COMMANDS

delete ipv6 static-routes all

Syntax	delete ipv6 static-routes all
View	System view
Parameters	None
Description	Use the delete ipv6 static-routes all command to delete all static routes
	including the default route.
	When using this command, you will be prompted whether to continue the
	deletion and only after you confirm the deletion will the static routes be deleted.
Related commands:	display ipv6 routing-tableon page 942 and ipv6 route-static.
Examples	# Delete all IPv6 static routes.
	<Sysname> system-view
	[Sysname] delete ipv6 static-routes all
	This will erase all ipv6 static routes and their configurations, you
	must reconfigure all static routes
	Are you sure?[Y/N]Y

ipv6 route-static

Syntax For a broadcast interface (Ethernet interface, VLAN interface), or NBMA interface

(X25 or frame relay interface):

ipv6 route-staticipv6-address prefix-length [ interface-type interface-number ] nexthop-address [ preference preference-value ]

undo ipv6 route-staticipv6-address prefix-length [ interface-type interface-number ] [ nexthop-address ] [ preference preference-value ]

For a point-to-point interface (serial port):

ipv6 route-staticipv6-address prefix-length { interface-type interface-number nexthop-address } [ preference preference-value ]