3Com MSR 30, MSR 50 manual Qos wred queue table, Qos wred apply

1854 CHAPTER 122: WRED TABLE CONFIGURATION COMMANDS

Table 492 Description on the fields of the display qos wred table command

Field	Description
Discard probability	Denominator for calculating drop probability

qos wred queue table

Syntax	qos wred queue table table-name
	undo qos wred table table-name
View	System view
Parameters	queue: Queue-based table, which randomly drops packets according to the
	queue the packet belongs to when congestion occurs.
	table table-name: Specified the table name, a string of characters in the range 1
	to 32.
Description	Use the qos wred queue table command to create WRED table and enter the
	WRED table view.
	Use the undo qos wred table command to delete the global WRED table.
	By default, no global WRED table exists.
	It is not allowed to delete the table being used.
	The queue-based WRED table can be applied only on Layer 2 port, on which the
	queue-based WRED table can be applied only.
Related commands:	qos wfq, qos wred enable, display qos wred interface.
Examples	# Create queue-based WRED table exp-table1.
	<Sysname> system-view
	[Sysname] qos wred queue table exp-table1
	[Sysname-wred-table-queue-table1]

qos wred apply

Syntax qos wred apply table-nameundo qos wred apply

View L2 interface view/port group view

Parameters table-name: Specifies the WRED table name.