3Com MSR 50, MSR 30 manual Display ipsec tunnel, Syntax display ipsec tunnel, 2129

2129

replay packet: 0

packet too long: 0

wrong SA: 0

Table 567 Description on the fields of the display ipsec statistics command

Field	Description
input/output security packets	Number of inbound IPSec protected packets and number
	of outbound IPSec protected packets
input/output security bytes	Number of inbound IPSec protected bytes and number of
	outbound IPSec protected bytes
input/output dropped security	Number of inbound IPSec protected packets that are
packets	discarded by the device and number of outbound IPSec
	protected packets that are discarded by the device
dropped security packet detail	Detailed information about inbound/outbound packets
	that get dropped
not enough memory	Number of packets dropped due to lack of memory
can’t find SA	Number of packets dropped due to finding no security
	association
queue is full	Number of packets dropped due to full queues
authentication has failed	Number of packets dropped due to authentication failure
wrong length	Number of packets dropped due to wrong packet length
replay packet	Number of packets replayed
packet too long	Number of packets dropped due to excessive packet
	length
wrong SA	Number of packets dropped due to improper SA

display ipsec tunnel

Syntax display ipsec tunnel

View Any view

Parameter None

Description Use the display ipsec tunnel command to display IPSec tunnel information.

Example # Display information about IPSec tunnels.

<Sysname> display ipsec tunnel total tunnel : 1

------------------------------------------------

Connection ID : 3

Perfect forward secrecy: None

SA’s SPI :

Inbound : 187199087 (0xb286e6f) [ESP]

Outbound : 3562274487 (0xd453feb7) [ESP]

Tunnel :

Local Address: 44.44.44.44 Remote Address : 44.44.44.55

Flow : (8 times matched)

Sour Addr : 44.44.44.0/255.255.255.0 Port: 0 Protocol : IP