3Com MSR 50 manual Ripng, # Restore the default RIPng route priority, Undo ripng process-id, 1317

1317

preference: RIPng route priority, in the range of 1 to 255.

Description Use the preference command to specify the RIPng route priority.

Use the undo preference route-policycommand to restore the default.

By default, the priority of a RIPng route is 100.

Using the route-policykeyword can set a priority for routes filtered in by the routing policy:

■If a priority is set in the routing policy, the priority applies to matched routes, and the priority set by the preference command applies to routes not matched.

■If no priority is set in the routing policy, the one set by the preference command applies to all routes.

Examples # Set the RIPng route priority to 120.

<Sysname> system-view

[Sysname] ripng 100

[Sysname-ripng-100] preference 120

# Restore the default RIPng route priority.

[Sysname-ripng-100] undo preference

ripng

Syntax ripng [ process-id ]

undo ripng [ process-id]

View System view

Parameters process-id: RIPng process number, in the range of 1 to 65535. The default value is 1.

Description Use the ripng command to create a RIPng process and enter RIPng view.

Use the undo ripng command to disable a RIPng process.

By default, no RIPng process is enabled.

Examples # Create RIPng process 100 and enter its view.

<Sysname> system-view

[Sysname] ripng 100

[Sysname-ripng-100]

# Disable RIPng process 100.