3Com MSR 30, MSR 50 manual Select-rule type-first, Undo select-rule type-first, Meanings of values

2640 CHAPTER 174: DIAL PLAN CONFIGURATION COMMANDS

View Voice dial program view

Parameter max-number: Maximum number of voice entities found, in the range 1 to 128.

Description Use the select-rulesearch-stopcommand to configure the maximum number of voice entities found.

Use the undo select-rulesearch-stopcommand to restore the maximum number of voice entities found to 128.

By default, the maximum number of voice entities found is 128.

The select-rulesearch-stopcommand is used to define the maximum number of qualified voice entities to be found before the search stops. Even if the number of voice entities meeting call requirements is greater than max-number, the system will make call attempts to only the maximum number (max-number) of voice entities that are matched in accordance with rules.

Related command: select-rulerule-orderand select-ruletype-first.

Example # Configure the maximum number of voice entities found to 5.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] select-rule search-stop 5

select-rule type-first

Syntax select-ruletype-first1st-type 2nd-type 3rd-type

undo select-rule type-first

View Voice dial program view

Parameter 1st-type: Serial number of the type of the first priority, in the range of 1 to 3. Table 693 describes these values:

2nd-type: Serial number of the type of the second priority, in the range of 1 to 3. The value must be different from that of 1st-type.

3rd-type: Serial number of the type of the third priority, in the range of 1 to 3. The value must be different from that of 1st-typeand 2nd-type.

Table 693 describes the meanings of these values.

Table 693 Meanings of values

Value	Meaning
1	POTS voice entity
2	VoIP voice entity