3Com MSR 30, MSR 50 manual Input number type, Number type Description, Numbering plan Description

2636 CHAPTER 174: DIAL PLAN CONFIGURATION COMMANDS

■For the left-right dot match rule, digits which the dots in the output-numberargument correspond to are extracted from left to right according to the number of dots in the output-numberargument to replace the dots in the output-numberargument one by one. The digits that are not extracted in the input-numberargument are discarded. Note that the right-left and left-right dot match rules are only applicable to the dot handling in the input number argument and that the extracted digits will always replace the dots in the output-numberargument from left to right.

number-type: Specifies the type of a number.

input-number-type: Type of an input number involved in number substitution. For the values, see Table 688.

Table 688 Input number type

Number type	Description
abbreviated	Abbreviated number
any	Any number
international	International number
national	National number, but not a local
	network
network	Specific service network number
reserved	Reserved number
subscriber	Local network number
unknown	Number of an unknown type

output-number-type: Type of an output number involved in number substitution. For the values, see Table 689.

Table 689 Output number type

Number type	Description
abbreviated	Abbreviated number
international	International number
national	National number, but not a local network number
network	Specific service network number
reserved	Reserved number
subscriber	Local network number
unknown	Number of an unknown type

numbering-plan: Specifies a numbering plan.

input-numbering-plan: Input numbering plan involved number substitution. For the values, see Table 690.

Table 690 Input numbering plan

Numbering plan	Description
any	Any numbering plan
data	Data numbering plan