3Com MSR 50, MSR 30 manual 140, Ipsec Configuration Commands, Ah authentication-algorithm

140

IPSEC CONFIGURATION COMMANDS

ah authentication-algorithm

Syntax	ah authentication-algorithm { md5 sha1 }
	undo ah authentication-algorithm
View	IPSec proposal view
Parameter	md5: Uses MD5.
	sha1: Uses SHA1.
Description	Use the ah authentication-algorithmcommand to specify the authentication
	algorithm for the authentication header (AH) protocol.
	Use the undo ah authentication-algorithmcommand to restore the default.
	By default, MD5 is used.
	Note that you need to use the transform command to specify the security
	protocol as AH or both AH and ESP before specifying the authentication algorithm
	for AH.
Related command:	ipsec proposal and transform.
Example	# Configure IPSec proposal prop1 to use AH and SHA1.
	<Sysname> system-view
	[Sysname] ipsec proposal prop1
	[Sysname-ipsec-proposal-prop1] transform ah
	[Sysname-ipsec-proposal-prop1] ah authentication-algorithm sha1

cryptoswitch fabric enable

Syntax cryptoswitch fabric enable

undo cryptoswitch fabric enable

View System view