Event Configuration
You can select the system log events and SMTP events. When selected events occur, the system will send out the log information. Also, per port log and SMTP events can be
selected. After configure, Click
Apply 
.
System event selection: 4 selections – Device cold start, Power status, SNMP Authentication Failure, and Super ring topology change. Mark the checkbox to select the event. When selected events occur, the system will produce the logs.
Device cold start: when the device executes cold start action, the system will produce a log event.
Device warm start: when the device executes warm start, the system will produce a log event.
Authentication Failure: when the SNMP authentication fails, the system will produce a log event.
Super Ring topology change: when the Super ring topology has changed, the system will produce a log event.
124
