bytes.
System Location: assign the switch physical location. The maximum length is 64 bytes.
System Description: display the description of switch. Read only cannot be modified.
Firmware Version: display the switch’s firmware version.
Kernel Version: display the kernel software version.
Hardware version: display the switch hardware version.
MAC Address: display the unique hardware address assigned by manufacturer (default).
System Information interface
IP Address
User can configure the IP Settings and DHCP client function, than clicks
Apply |
button.
After reset the IP address, you must reboot the switch.
DHCP: disable or enable the DHCP client function.
IP Address: assign the switch IP address. The default IP is 192.168.1.77.
Subnet Mask: assign the switch IP subnet mask.
117
