Enter the system name, contact, and location information.
1.Name: assign a name for the switch.
2.Contact: Type the name of contact person or organization.
3.Location: Type the location of the switch.
4. Click
Apply 
.
Community Strings
You can define new community string set and remove unwanted community string.
1.String: fill the name of string.
2.RO: Read only. Enables requests accompanied by this string to display
3.RW: Read write. Enables requests accompanied by this string to display
4.Click
Add 
.
5.To remove the community string, select the community string that you have defined
and click
Remove 
. You cannot remove the default community string set.
Agent Mode: Select the SNMP version that you want to use it. And then click
Change |
to switch to the selected SNMP version mode.
146
