Milan Technology MIL-SM8002TG manual

		data unit (BPDU) message
		from the root switch within
		this interval, it recomputes
		the Spanning Tree Protocol
		(STP) topology. Use the no
		form of this command to
		return to the default interval.
		Use the spanning-tree
		hello-time global
		configuration command to
spanning-tree hello-time	Global	specify the interval between		Switch (config)# spanning-tree
		hello	2 sec.
[seconds]	configuration mode			hello-time 3
		bridge protocol data units
		(BPDUs). Use the no form of
		this command to return to the
		default interval.
		Use the spanning-tree cost
		interface configuration
		command to set the path
		cost for Spanning Tree	10 Mbps
		Protocol (STP) calculations.		Switch (config)# interface
			– 100
	Interface	In the event of a loop,		fastEthernet 0/2
stp-path-cost [PortCost]
	configuration mode	spanning tree considers the		Switch (config-if)#
			100 Mbps
		path cost when selecting an		stp-path-cost 20
			– 10
		interface to place into the
		forwarding state. Use the no
		form of this command to
		return to the default value.
		Use the spanning-tree
		forward-time global
		configuration command to
spanning-tree	Global	set the forwarding-time for	15 sec.	Switch (config)# spanning-tree
forward-time [seconds]	configuration mode	the specified spanning-tree		forward-time 20
		instances. The forwarding
		time determines how long
		each of the listening and
		25