59
Trunk Configuration – Aggregator Information interface
When you had setup the LACP aggregator, you can configure port state activity. You can
change the port state activity to Active or Passive.
1. Active: The port automatically sends LACP protocol packets.
2. Passive: The port does not automatically send LACP protocol packets, and responds
only if it receives LACP protocol packets from the opposite device.
[NOTE]
a. A link having either two active LACP ports or one active port can perform dynamic
LACP trunking.
b. A link has two passive LACP ports will not perform dynamic LACP trunking
because both ports are waiting for and LACP protocol packet from the opposite
device.