Rate Limiting interface
All the ports support port ingress and egress rate control. For example, assume port 1 is 10Mbps, users can set it’s effective egress rate is 1Mbps, ingress rate is 500Kbps. The switch performs the ingress rate by packet counter to meet the specified rate.
Ingress: enter the port effective ingress rate. The default value is “0”.
Egress: enter the port effective ingress rate. The default value is “0”.
Click
Apply |
to apply the settings.
[NOTE] Rate Range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports) and zero means no limit
VLAN configuration
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traffic so only members of the VLAN receive traffic from the
135
