Milan Technology MIL-SM8002TG manual

		Use the flow control
		configuration command on		Switch (config)# interface
		Ethernet ports to control traffic
flowcontrol on or no	Interface			fastEthernet 0/1
		rates during congestion.	On
flowcontrol	configuration mode			Switch (config-if)# flowcontrol
		Use the no form of this
				on
		command to disable security on
		the port.
		Use the security configuration		Switch (config)# interface
		command on Ethernet ports.
security on or no	Interface			fastEthernet 0/1
		Use the no form of this	Disable
security	configuration mode			Switch (config-if)# security
		command to disable security on
				on
		the port.
		Use the priority configuration		Switch (config)# interface
		command on Ethernet ports.
priority on [hi low] or	Interface			fastEthernet 0/1
		Use the no form of this	Disable
no priority	configuration mode			Switch (config-if)# priority on
		command to disable security on
				hi
		the port.
		Set bandwidth in or out rate.		Switch (config)# interface
Bandwidth [in out]	Interface	The value rage is (0~999), and	Disable	fastEthernet 0/1
[value]	configuration mode	zero of the value is disable		Switch (config-if)# bandwidth
		(The module can’t be setting)		in 50
		18