Milan Technology MIL-SM8002TG - page 25

17
Use the duplex configuration
command to specify the duplex
mode of operation for Fast
Ethernet.
Auto
Switch (config)# interface
fastEthernet 0/1
Switch (config-if)#
duplex full
duplex [full | half| auto] Interface
configuration mode
Use the duplex configuration
command to specify the duplex
mode of operation for module
Ethernet.
Auto
Switch (config)# interface
moduleEthernet 1/1
Switch (config-if)# duplex full
speed
[10 | 100 | 1000 | auto]
Interface
configuration mode
Use the speed configuration
command to specify the speed
mode of operation for Fast
Ethernet.
Auto
Switch (config)# interface
fastEthernet 0/1
Switch (config-if)# speed 10
speed [10| 100 | 1000 |
auto]
Interface
configuration mode
Use the speed configuration
command to specify the speed
mode of operation for module
Ethernet.
(The 100Base-FX module only
supported for speed 100)
(The 1000Base-FX module
only supported for speed 1000
& auto)
Switch (config)# interface
fastEthernet 1/2
Switch (config-if)# speed
1000