Milan Technology MIL-SM8002TG manual Trunk Commands Set

show bandwidth

Interface

configuration mode

Display the bandwidth of the

values

Switch (config)# interface

fastEthernet 0/1

Switch (config-if)# Show

bandwidth

Trunk Commands Set

Commands	Command Level	Description	Defaults	Example
port group				LACP:
				Switch (config)# port group 1
[group-number]
				1-4
[port-list] lacp [on off]		Add trunking group.
				lacp on	workp 2
workp [work ports]	Global	Use the no form of this
			Disable
	configuration mode	command to delete trunking
				Trunk without LACP:
no port group		group.
				Switch (config)# port group 1
[group-number] lacp [on
				1-4
off] workp [work ports]
				lacp off	workp 4
				Switch # show group 1
		Display trunk group		Group Trunk.1:
show group [group-ID]	Privileged EXEC	information. If there is no		Ports: 02 03 04
	mode	group-number in put,		Priority: 0001
		display all trunk groups.		Lacp: Enable
				Work ports: 0
port group				Switch (config)# port group 3
	Global	Set trunking group port		activityport 2-4
[group-number]
	configuration mode	active
activityport [port-list]
				Trunk.1 Lacp: Enable
		20