3Com MSR 50, MSR 30 manual 173, Voip Configuration Commands

173

VOIP CONFIGURATION COMMANDS

	The voice subscriber line in this chapter refers to a digital or analog subscriber line,
n unless otherwise specified.
address
Syntax	address { ip ip-address ras sip { ip ip-address [ port port-number ] proxy } }
	undo address { ip ras sip { ip proxy } }
View	VoIP entity view
Parameter	ip ip-address: IP address of the terminating gateway, namely, the destination
	address of a VoIP entity.
	ras: Uses RAS messages to interact with the GK server so as to find the mapping
	between the phone number and the IP address. They are used only in the
	networking configuration that uses a gatekeeper (GK) to provide IP voice services.
	sip: Uses the SIP.
	port port-number: Port number, in the range of 1 to 65535. The default port
	number is 5060.
	proxy: Uses the SIP proxy server to implement SIP message exchange.
Description	Use the address command to configure a policy for the routing between the VoIP
	entity and the terminating voice gateway.
	Use the undo address command to remove the routing policy that has been
	configured.
	By default, no policy is configured for routing from the VoIP entity to the peer VoIP
	gateway.
Related command:	match-template.
Example	# Configure the H.323 direct routing for voice entity 10 with the called number
	1234 in its match template, and set the IP address of the terminating gateway to
	10.1.1.2.

<Sysname> system-view [Sysname] voice-setup