3Com MSR 50, MSR 30 manual Description OSPF/OSPF area view, Display ospf abr-asbr

1113

The default-route-advertise summary cost command is applicable only to VPNs, and the default route is redistributed in a Type-3 LSA. The PE router advertises the redistributed default route to the CE router.

Related commands: import-route (OSPF view)

Examples # Generate a default route in an ASE LSA into the OSPF routing domain (no default route configured on the router).

<Sysname> system-view

[Sysname] ospf 100

[Sysname-ospf-100] default-route-advertise always

description (OSPF/OSPF area view)

Syntax description description

undo description

View OSPF view/OSPF area view

Parameters description: Describes OSPF process in OSPF view, or describes OSPF area in OSPF area view. description is a string of up to 80 characters.

Description Use the description command to describe an OSPF process or area.

Use the undo description command to remove the description.

No description is configured by default.

Use of this command is only for identification of an OSPF process or area, and has no special meaning.

Examples # Describe the OSPF process 100 as abc.

<Sysname> system-view

[Sysname] ospf 100

[Sysname-ospf-100] description abc

# Describe the OSPF area0 as bone area.

<Sysname> system-view [Sysname] ospf 100 [Sysname-ospf-100] area 0

[Sysname-ospf-100-area-0.0.0.0] description bone area

display ospf abr-asbr

Syntax display ospf [ process-id] abr-asbr

View Any view