3Com MSR 50, MSR 30 manual Timer lsp-max-age, Timer lsp-refresh, Related commands timer lsp-refresh

1085

Examples # Set the maximum LSP generation interval to 10 seconds, initial interval to 100 milliseconds and the incremental interval to 200 milliseconds.

<Sysname> system-view

[Sysname] isis

[Sysname-isis-1]timer lsp-generation 10 100 200

# Set the maximum LSP generation interval to 15 seconds.

<Sysname> system-view

[Sysname] isis

[Sysname-isis-1]timer lsp-generation 15

timer lsp-max-age

Syntax timer lsp-max-age seconds

undo timer lsp-max-age

View IS-IS view

Parameters seconds: Specifies the LSP maximum aging time in seconds, ranging from 1 to 65535.

Description Use the timer lsp-max-agecommand to set the LSP maximum aging time for the current router.

Use the undo timer lsp-max-agecommand to restore the default.

The default is 1200 seconds.

A router puts the specified LSP maximum aging time into an LSP before advertisement. When the LSP is received by other routers, the aging time will decrease as the time goes by. If no update is received for the LSP after its aging time decreases to 0, the LSP will be deleted from the LSDB.

Related commands: timer lsp-refresh.

Examples # Set the maximum LSP aging time to 1500 seconds.

<Sysname> system-view

[Sysname] isis

[Sysname-isis-1] timer lsp-max-age 1500

timer lsp-refresh

Syntax timer lsp-refresh seconds

undo timer lsp-refresh

View IS-IS view